IS-5120 Std.
Company Profile
Contact Us
Series "MDP" Pumps
Advanced Magnetic Technology:

State-of-the-art magnetic technology provides a safe and reliable pump for difficult applications. A magnetic coupling consists of two magnet assemblies. One is the outer assembly (the drive magnet) and other is the inner assembly (the driven magnet). The outer assembly is connected to a motor and the inner assembly is directory attached to a pump impeller. When load is applied, the coupling effects angularly and magnets create a force which is used to transfer toque from the motor to impeller. This permanent magnet coupling creates neither slippage nor induction current during rotation. There is no energy loss in this permanent – permanent magnet coupling. ‘Micro-Mach' pumps have an inner magnet assembly which is directly moulded in to the impeller.
Engineered For Environment Safety:
Precision Engineering Company offers magnetic drive chemical pumps which safely handle hazardous, highly corrosive, explosive and toxic chemical. They provide safe, leak-proof service because the magnetic coupling eliminates the need for traditional sealing methods, such as mechanical seals or gland packings. Which is the main source of leakage problems on pumps. As a result, down time and maintenance cost are greatly reduced. And there are no warn seals to replace.

These pumps are available in GFR-PP and PVDF for maximum chemical resistance.

'Micro-mach' Magnetic drive chemical process pumps offer many benefits.
  • Minimizes exposure of your personnel to hazardous chemicals.
  • Eliminates contacting seal faces which are prone to wear and leakage.
  • Provides superior corrosion resistance.
  • Eliminates costly seal flush systems required on all plums with double mechanical seals.
  • Reduces downtime and maintenance costs through extended service intervals.
  • Eliminates alignment problems inherent in direct-coupled units.
  • They are ideal for vacuum service and transfer of expensive, toxic, radio active, hazardous and corrosive chemicals.
Seal-less features make these pumps perfect for environments subject to federal regulations.
  • Chemical
  • Pharmaceutical
  • Textile Processing & Dye Baths
  • Electroplating
  • Various Metal Recovery Systems
  • Metal Finishing
  • Colour Photo Processing
  • T.V Tube Processing
  • Food Processing: Dairies, Soft Drinks, Beverages
  • X-Ray Film
  • I.C Photo Engraving Process/PCB Plants
  • Refrigeration & Chilling Plants
  • Water Treatment Plants
  • Galvanizing/Anodizing Planting Plants
  • Etching/Spark Erosion Machines & many more…
…where pump leakage must be avoided.

Pump Model Connection Max. Flow (Ltrs/Min) Max. Head(Meter) Std. Duty Point Q/H Sq. Gr. Limit Motor/Kw Phase ø
Suction Discharge
PMP-15 14mm Hose Type 14mm
15 2.5 8 LPM/2Mtr 1.1 34 Watt
PMP-30 18mm Hose Type 18mm Hose
30 3.4 22 LPM/2 Mtr 1.1 46 Watt 1 ø
PMP-50 20mm Hose Type 20mm Hose
50 4.5 30LPM/3 Mtr 1.2 65 Watt 1 ø
PMP-85 26mm Hose Type 85mm Hose
85 9.5 40LPM/3Mtr 1.2 195 Watt 1 – 3 ø
PMP-115 26mm Hose Type 26mm Hose Type 100 11.5 50 LPM/7 Mtr 1.3 300 Watt 1-3 ø
PMP-300 11/ 2” BSP Female 11/4” BSP Male 280 20 12M3 /hr.10 Mtr 1.4 1.1KW 3 ø
PMP-520 2” NPT Male 11/2” NPT Male 520 26 12M3/hr.20Mtr 1.3 2.2 KW 3 ø

  • The Specific gravity limit indicated above is the value max. shaft power level and the liquid viscosity of 1 mPa*s (1 cP)
  • Liquid temperature range: 0 to 120 c. Slurry: inquire to your nearest Micro-Mach representative or dealer. Flange type is available on request.
  • Pump Model 115 & 300 available in flame proof motor also.